Technology: WAN optimization: changing market dynamics and the road ahead

Frost & Sullivan to host an analyst briefing on the WAN optimization market in Asia-Pacific on Thursday, June 5, 2008; 11:00am (GMT +08:00)

Singapore (BUSINESS WIRE) - The WAN optimization market continues to evolve at breakneck speed. The industry has experienced intense consolidation in the past few years with the entry of network infrastructure and security vendors into the playing field.

In tandem with the shifting dynamics, the market has also seen exponential growth. "The WAN optimization sector has witnessed considerable growth and consolidation in recent years; and today stands at an inflection point as a result of increasing convergence," observes Arun Chandrasekaran, industry manager at Frost & Sullivan.

"Security, mobility, virtualization and infrastructure convergence is reshaping the dynamics of this market," he says, adding that these factors will determine the industry forerunners in the long-term.

Chandrasekaran will share his views on the current state and key emerging trends in the Asia-Pacific WAN optimization market at an analyst briefing to be held on Thursday, June 5, 2008, 11:00am (Singapore time).

The briefing takes a look at the key supply and demand trends in the WAN optimization sector and the emerging trends that will influence the landscape of this industry in the coming years. Highlights include market drivers and restraints, evolution of the business ecosystem, demand trends by vertical, horizontal and geographic segment, and future trends in WAN optimization.

The briefing will especially benefit all vendors, resellers, service providers, and current and potential end users of WAN optimization tools.

Those interested in participating in the webinar should send an email to Sarah Lourdes at sarah.lourdes@frost.com with the following information: title of analyst briefing, full name, media/company name, title, telephone number, e-mail address and country.

Upon receipt of the above information, a registration link will be e-mailed to you.

Frost & Sullivan, the Growth Partnership Company, partners with clients to accelerate their growth. The company's TEAM Research, Growth Consulting and Growth Team Membership empower clients to create a growth-focused culture that generates, evaluates and implements effective growth strategies. Frost & Sullivan employs over 45 years of experience in partnering with Global 1000 companies, emerging businesses and the investment community from more than 30 offices on six continents. For more information about Frost & Sullivan's Growth Partnerships, visit http://www.frost.com.

Frost & Sullivan Corporate Communications - Asia Pacific
Sarah Lourdes, +603-6207-1030 sarah.lourdes@frost.com

Business: Intertek's Electrical Laboratory in Riyadh Saudi Arabia accredited

Intertek's Electrical Laboratory in Riyadh Saudi Arabia accredited by the Saudi Accreditation ommittee (SAC) of the Saudi Arabia Standards Organisation (SASO)

London (BUSINESS WIRE) - Intertek, a leading provider of quality and safety solutions to a wide range of industries worldwide, is pleased to announce that SASO, the Saudi Arabian Standards Organisation, have recently accredited its electrical laboratory in Riyadh, Saudi Arabia.

This accreditation brings even greater benefits to our clients both in the Kingdom of Saudi Arabia and overseas wishing to have products tested for conformity to the Saudi Standards or Gulf Regional requirements or International requirements.

Ian Kitchin, Vice President of Intertek International says; "The development of this laboratory and the accreditation by the National Accreditation Committee (SAC), is testament to Intertek International's commitment to continuing to develop its long relationships and operations in the Kingdom of Saudi Arabia. In line with the Royal and Ministerial Decrees, Intertek International is supporting further development of testing and certification operations in the KSA."

About Intertek's Government Services

Intertek offers a range of services to governments, national standards organisations and customs departments. We help ensure that goods imported into these countries comply with safety, quality and other standards, preventing the dumping of unsafe goods and improving quality.

Foreign finance ministries use Intertek's services to increase import duty collection and efficiency. Our cargo scanning services reduce international trade security risks for governments. Intertek's worldwide laboratories give rapid inspection, certification and shipment valuations to companies and foreign governments.

About Intertek

Intertek is a leading provider of quality and safety solutions serving a wide range of industries around the world.
Our services take us into almost every field imaginable, such as textiles, toys, electronics, building, heating, pharmaceuticals, petroleum, minerals, food and cargo scanning.
We operate a global network of more than 1,000 laboratories and offices and over 21,000 people in 110 countries around the world.

For more information, visit www.intertek.com/government IntertekHatim Afeneh, General Manager, Government Services
Telephone: +966 1 412 7751 Fax: +966 1 412 7716 hatim.afeneh@intertek.com info.dubai@intertek.com

Technology: ANADIGICS supports LG Electronics` professional level camera phone

Warren, N.J., (ANTARA News/PRNewswire-AsiaNet) - ANADIGICS, Inc. (Nasdaq: ANAD) today announced that it began shipping production volumes of its ANADIGICS AWT6277 WCDMA power amplifier (PA) modules to LG Electronics for use in the new LG Viewty (LG-KU990), a 5.0 mega pixel professional level camera phone currently available in the UK.

The LG Viewty raises the bar for camera phones, with features including 5.0 mega pixel resolution, auto and manual focus, image stabilization and a handwriting editing function. The video camera on this candy bar form handset can also take video at up to 120 frames per second. With just one click, users can upload a recorded video directly to Google's YouTube and share it with the world. The 3.0 inch full touch screen enables users to enjoy high quality DivX video files in wide screen format.

"We are very pleased that LG Electronics has chosen our AWT6277 PA module for their cutting-edge LG Viewty 3G camera phone," said Dr. Bami Bastani, President & CEO of ANADIGICS. "Our technologically advanced compact dual-band WCDMA power amplifier offers an industry-leading combination of high performance, small footprint, and low profile, making it possible for this mobile device to do much more than make a phone call."

Specifically designed to meet the needs of feature rich mobile handsets, the AWT6277 HELP(TM) WCDMA PA includes ANADIGICS' HELP(TM) technology which reduces WCDMA average power consumption by 50%. Combined with low leakage current in shutdown mode, the AWT6277 PA delivers longer battery life and additional talk-time-two key metrics for mobile handset designers.

The self-contained 4 mm x 4 mm x 1.1 mm surface-mount PA incorporates matching networks optimized for output power, efficiency, and linearity in a 50 ohm system, which reduces device footprint and the need for external components, making it extremely well suited for super-thin designs. AWT6277 HELP(TM) PA is enabled by ANADIGICS' advanced patented InGaP-Plus(TM) HBT technology, which combines InGaP HBT & pHEMT devices on the same die and delivers state-of-the-art performance, reliability, temperature stability, and ruggedness.

The ANADIGICS AWT6277 PA is available now. For additional information, contact ANADIGICS by phone (908) 668-5000 or FAX (908) 668-5132 or visit the Company's Web site at http:/www.anadigics.com/products/handsets_datacards cdma_power_amplifiers/awt6 277 (Due to the length of the URL, please copy and paste into browser to view.)

About ANADIGICS, Inc.

ANADIGICS, Inc. (Nasdaq: ANAD - News) is a leading provider of semiconductor solutions in the rapidly growing broadband wireless and wireline communications markets. Founded in 1985 and headquartered in Warren, NJ, the company's award-winning products include power amplifiers, tuner integrated circuits, active splitters, line amplifiers, and other components, which can be sold individually or packaged as integrated radio frequency and front end modules.

For more information, visit www.anadigics.com

Safe Harbor Statement

Except for historical information contained herein, this press release contains projections and other forward-looking statements (as that term is defined in the Securities Exchange Act of 1934, as amended). These projections and forward-looking statements reflect the Company's current views with respect to future events and financial performance and can generally be identified as such because the context of the statement will include words such as "believe", "anticipate", "expect", or words of similar import. Similarly, statements that describe our future plans, objectives, estimates or goals are forward-looking statements. No assurances can be given, however, that these events will occur or that these projections will be achieved and actual results and developments could differ materially from those projected as a result of certain factors. Important factors that could cause actual results and developments to be materially different from those expressed or implied by such projections and forward-looking statements include those factors detailed from time to time in our reports filed with the Securities and Exchange Commission, including the Company's Annual Report on Form 10-K for the year ended December 31, 2007, and those discussed elsewhere herein.

SOURCE: ANADIGICS, Inc.
CONTACT: Media Relations,
Charlotte Chiang,
+1-908-668-5000, or
cchiang@anadigics.com, or
Corporate Contact,
Jennifer Palella,
+1-908-668-5000, or
jpalella@anadigics.com, or
Investor Relations,
Thomas Shields,
+1-908-412-5995, or
tshields@anadigics.com,
all of ANADIGICS, Inc.
Web site: http://www.anadigics.com
(ANAD)

Energy: AES completes sale of power plant and coal mine in Kazakhstan

Maintains ownership and operation of generation and distribution businesses in Eastern Kazakhstan

Arlington, Va. (BUSINESS WIRE) - The AES Corporation (NYSE: AES) today announced it has completed the sale of its interest in the AES Ekibastuz power plant and Maikuben coal mine in Kazakhstan to Kazakhmys PLC for gross proceeds of $1.1 billion.

AES will also receive up to $381 million over a three-year period to manage and operate the facilities acquired by Kazakhmys, Kazakhstan's largest producer of copper and one of the leading copper producers in the world.

AES will maintain ownership and operation of its other facilities located in Eastern Kazakhstan, which include thermal and hydro generation capacity of approximately 2,688 MW and a distribution business with over 400,000 customers.

"The decision to sell a portion of our business in Kazakhstan is consistent with our focus on portfolio management and how we assess the long term potential of each of our businesses in the context of our broader portfolio," said Paul Hanrahan, AES President and Chief Executive Officer. "What makes this sale unique is that AES will continue to maintain a significant presence in the country and play an active role improving the delivery of power in this growing market through the management agreement with Kazakhmys and our remaining generation and distribution businesses in Eastern Kazakhstan."

Ekibastuz, a coal-fired power plant with current available capacity of approximately 2,250 MW, and the Maikuben coal mine are both located in Northern Kazakhstan. AES acquired its initial interests in Ekibastuz and Maikuben in 1996 and 2001, respectively. Since 1996, AES has invested in modernization programs bringing into operation more than 2,000 MW of generation capacity at Ekibastuz.

Kazakhmys has its corporate headquarters in London and operations in Kazakhstan and Germany.

About AES

AES is one of the world's largest global power companies, with 2007 revenues of $13.6 billion. With operations in 29 countries on five continents, AES's generation and distribution facilities have the capacity to serve 100 million people worldwide. Our 15 regulated utilities amass annual sales of over 78,000 GWh and our 123 generation facilities have the capacity to generate more than 43,000 megawatts. Our global workforce of 28,000 people is committed to operational excellence and meeting the world's growing power needs. To learn more about AES, please visit www.aes.com or contact AES media relations at media@aes.com.

Safe Harbor Disclosure
This news release contains forward-looking statements within the meaning of the Securities Act of 1933 and of the Securities Exchange Act of 1934. Such forward-looking statements include, but are not limited to, those related to future earnings, growth and financial and operating performance. Forward-looking statements are not intended to be a guarantee of future results, but instead constitute AES's current expectations based on reasonable assumptions. Forecasted financial information is based on certain material assumptions. These assumptions include, but are not limited to, continued normal levels of operating performance and electricity volume at our distribution companies and operational performance at our generation businesses consistent with historical levels, as well as achievements of planned productivity improvements and incremental growth investments at normalized investment levels and rates of return consistent with prior experience.

Actual results could differ materially from those projected in our forward-looking statements due to risks, uncertainties and other factors. Important factors that could affect actual results are discussed in AES's filings with the Securities and Exchange Commission, including, but not limited to, the risks discussed under Item 1A "Risk Factors" in AES's 2007 Annual Report on Form 10-K. Readers are encouraged to read AES's filings to learn more about the risk factors associated with AES's business. AES undertakes no obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.

The AES Corporation
Media
Robin Pence, 703-682-6552
or
Investor
Ahmed Pasha, 703-682-6451
or UK
Sarah Salati, +44(0)2083345300

Technology: FRONTIERS develops ultra-compact, ultra-low delay MPEG2 encoder

-The ultra-compact (160 x 160 mm) encoder is attachable to a video cam and revolutionalizes the shooting scenes -

Tokyo - /KYODO JBN-AsiaNet/ - FRONTIERS Co., Ltd. (Head Office: Shibuya-ku, Tokyo, President: Hiroshi Tango, FRONTIERS), a pioneer in HD video-over-IP transport technology, has announced that it has developed and released an ultra-compact MPEG2(*1) encoder HD c3000e, which can be integrated with a commercial HD camera.

The HD c3000e is an HD(*2)-compatible encoder unit equipped with a compact, lightweight, ultra-low delay MPEG2 encoder core, which can be attached to a wireless HD relay camera. In addition to HD compatibility, the HD c3000e has achieved ultra-low delay of around 10 msec. Its compact size and lightweight also allow it to be attached to a wireless relay camera. The HD c3000e is an encoder unit that truly meets the on-site needs at shooting scenes.

< Physical features of HD c3000e - Dimensions: Height: 35mm, Width: 160 mm, Depth: 160 mm - Weight: 700g or less The HD c3000e is capable of encoding digital signal, which is input via SDI I/F, in MPEG2 format and outputting the stream data to ASI I/F in TS format, etc. Audio is compatible with linear PCM (SMPTE302M compliant). MPEG2 allows video transport with higher image quality and less bandwidth compared to JPEG2000.

< Key Features - Industry's first, compact, lightweight and power-saving design. - Delay through the encoder and the decoder is only 10 mm sec. - The case is made of material with high thermal conductivity and employs a fan-less, drip-proof and dust-proof design. - Up to three sets of configuration files can be memorized. - HD c3000e can be mounted to a camera using a detachable commercial V-shaped holder.

FRONTIERS has already started production of HD c3000e and plans to begin delivery soon. Prior to the release, a demonstration using HD c3000e will be shown in the Fuji Television booth at the IMC TOKYO 2008, which will be held at Makuhari Messe, Chiba, Japan, from June 11 to 13, 2008. Please come and see the quality and size of HD c3000e. For details about IMC TOKYO 2008, please visit http://www.imctokyo.jp/english/.

As transition to digital broadcast accelerates, FRONTIERS expects the compact, lightweight, HD-compatible HD c3000e to be widely used at scenes requiring mobile shooting, such as sports broadcasting, concerts and other events, and news reporting.

(*1) MPEG2: One of the methods used for compressing video data; part of the MPEG standard. It is widely used in DVD video and next-generation digital television, including terrestrial digital TV.

(*2) HD: Stands for High Definition. It refers to high-resolution video or High Vision video imagery.

About FRONTIERS Outline of business: FRONTIERS Co., Ltd. (Sogyo) was established in 1996 in Sagamihara, Japan. Under the corporate philosophy to be a true innovator who operates a business of turning 0 into 1 in leading-edge technological fields (FRONTIERS), thereby contributing to the creation of a better society, FRONTIERS has been delivering technologies from Japan and products to the Japanese market. FRONTIERS mainly develops, manufactures and sells video transmission equipment based on optical communications and IP technology. FRONTIERS solutions have already been widely deployed in international events such as the Winter Olympics in Turin and EXPO Aichi Japan. Our goal is to see our solutions from Japan, being used in every real-time IP transport of HD video, both in Japan and overseas, in the near future. For more information, please visit http://www.big-frontiers.co.jp .

SOURCE: FRONTIERS Co., Ltd.
Contact:
Midori Kaito
Corporate Communications
FRONTIERS CO., LTD.
Phone: +81-3-6419-3235
Fax: +81-3-6419-3237
E-mail: midori-kaito@big-frontiers.co.jp
URL: http://www.big-frontiers.co.jp
Image Attachments Links:: http://asianetnews.net

Technology: Marvell names Clyde R. Hosein Chief Financial Officer

Santa Clara, Calif. (ANTARA News/PRNewswire-AsiaNet) - Marvell Technology Group Ltd. (Nasdaq: MRVL), a leader in storage, communications, and consumer silicon solutions, today announced it has named Clyde R. Hosein Chief Financial Officer, effective June 23rd, 2008.

Mr. Hosein brings to Marvell more than 25 years of experience in finance and operations in high technology industries. Prior to joining the Company, Mr. Hosein was chief financial officer for Integrated Device Technologies (IDT) and held the same position at Advanced Interconnect Technologies (AIT). Before joining Advanced Interconnect Technologies, Mr. Hosein was the chief financial officer and senior director of corporate planning of Candescent Technologies Corporation.
Previous to Candescent, Mr. Hosein spent over 14 years with IBM Corporation, where he held several positions within their storage, microelectronics, data systems and corporate divisions.

"Clyde has extensive financial management experience in the tech sector as well as a strong record of improving operations within the organizations he has served," said Sehat Sutardja, Marvell's Chief Executive Officer. "I am confident that his past experience and proven leadership will help him guide Marvell as we continue to build a solid platform for growth. We are very pleased to welcome Clyde to the Marvell team."

"I'm extremely impressed with Marvell's history of innovation, market leadership, and their commitment to excellence," said Hosein. "I believe my background and expertise are an excellent fit for this world-class organization as it embarks on its next phase of growth and I am looking forward to helping the Marvell team achieve the next level of excellence."

Mr. Hosein holds an M.B.A. from New York University Stern School of Business and a B.S. in industrial engineering from Polytechnic University in New York. He is a member of the Board of Directors for Cree Inc., where he serves on the Audit and Governance and Nominating committees, having previously served on the Compensation Committee.

Mr. Hosein's appointment is concurrent with the transition of George de Urioste, who has served as interim Chief Financial Officer since January 2008 to a new role as Acting Chief Operating Officer, covering a broad range of responsibilities.
Pantas Sutardja, who has been serving as Acting COO, will relinquish those responsibilities in order to devote his full attention to his role as Chief Technology Officer (CTO).

"We want to thank George for his excellent service as interim chief financial officer," said Mr. Sutardja. "George has been an integral member of the Marvell management team for the past few months, and we look forward to his continued leadership as acting chief operating officer."

About Marvell

Marvell (Nasdaq: MRVL) is the leader in development of storage, communications, and consumer silicon solutions. The company's diverse product portfolio includes switching, transceiver, communications controller, wireless and storage solutions that power the entire communications infrastructure including enterprise, metro, home and storage networking. As used in this release, the terms "company" and "Marvell" refer to Marvell Technology Group Ltd. and its subsidiaries, including Marvell Semiconductor Inc. (MSI), Marvell Asia Pte Ltd (MAPL), Marvell Japan K.K., Marvell Taiwan Ltd., Marvell International Ltd. (MIL), Marvell U.K. Limited, Marvell Semiconductor Israel Ltd. (MSIL), Marvell Software Solutions Israel Ltd., and Marvell Semiconductor Germany GmbH. MSI is headquartered in Santa Clara, California and designs, develops and markets products on behalf of MIL and MAPL. MSI may be contacted at (408) 222-2500 or at http://www.marvell.com

Forward-looking Statements:
This release contains forward-looking statements that are subject to risks and uncertainties. Words such as "anticipates," "expects," "intends," "plans," "believes," "seeks," "estimates," "may," "will," "should," and their variations identify forward-looking statements. Statements that refer to, or are based on projections, uncertain events or assumptions also identify forward-looking statements. These statements are not guarantees of results and are subject to risks and uncertainties. Some risks and uncertainties that may adversely impact the statements in this release include, but are not limited to, the outcome of the company's search for a permanent CFO. For other factors that could cause Marvell's results to vary from expectations, please see the risks and other factors described in Marvell's Quarterly Reports on Form 10-Q , Annual Report on Form 10-K and Current Reports on Form 8-K as filed with the Securities and Exchange Commission from time to time. Marvell undertakes no obligation to revise or update publicly any forward-looking statements. Marvell(R) is a registered trademark of Marvell or its affiliates. Other names and brands may be claimed as the property of others.

For Further Information Contact:
Diane Vanasse
Marvell Public Relations
408-242-0027
dvanasse@marvell.com
Louise Kehoe
Ogilvy PR Worldwide
650-544-5070
louise.kehoe@ogilvypr.com

SOURCE: Marvell Technology Group Ltd.
CONTACT: Diane Vanasse,
Marvell Public Relations,
+1-408-242-0027,
dvanasse@marvell.com; or
Louise Kehoe of Ogilvy PR Worldwide,
+1-650-544-5070,
louise.kehoe@ogilvypr.com,
for Marvell Technology Group Ltd.
Photo: NewsCom: http://www.newscom.com/cgi-bin/prnh/20070411/SFW034LOGO
AP Archive: http://photoarchive.ap.org
PRN Photo Desk:
photodesk@prnewswire.com
Web site: http://www.marvell.com

Business: Brandes` view on Hibiya Engineering`s response to shareholder proposal

San Diego, (ANTARA News/PRNewswire-AsiaNet) - Brandes Investment Partners, L.P. ("Brandes") publicly disclosed on April 29th, 2008, that it submitted to Hibiya Engineering, Ltd. (the "Company"), an engineering company based in Japan and listed on the Tokyo Stock Exchange, a resolution (the "Resolution") to be submitted for shareholder approval at the Company's upcoming annual meeting of shareholders.

The Resolution calls for the Company's Board of Directors to authorize: 1) a one-time dividend of 32.5 yen per share of common stock (including the interim dividend of 7.5 yen per share, the annual dividend, if approved, shall be 40 yen per share), payable by September 30th, 2008, and 2) a share buyback program of up to 1.5 million shares for a maximum of 1.5 billion yen. A copy of the Resolution is available at the Brandes website at http://www.brandes.com/Inv PressReviews.htm

On May 15th, 2008, the Company issued a public statement opposing the Resolution due to the belief that it violates the Company's basic policy of distributing stable 'appropriate shareholder returns' based on securing 'necessary and ample internal reserves.' The statement implies that the Resolution is not 'appropriate' because the size of the dividend and share buyback proposed will be 3.3x consolidated net income, while the current Company plan will be 1.3x. While the payout ratio may appear high, the Resolution is not requesting for the commitment for a high long-term payout ratio, but rather a commitment to reduce what Brandes believes is substantial excess capital at the Company. The intent of the Resolution is for the Company to acknowledge its 'excess capital' and commit to gradually reducing it through means that the Company feels most appropriate. Therefore, Brandes believes that payout ratios are not the most relevant metric to measure whether the proposal is 'appropriate.'

In addition, Brandes believes that the Company has failed to specifically quantify what it refers to as 'necessary and ample internal reserves.' As of March 31st, 2008, the Company had approximately 41 billion yen in financial assets, which is significantly higher than the Company's current market value of nearly 30 billion yen. The Company has stated that of the 41 billion yen in financial assets, 31 billion yen is necessary for working capital and business/cross shareholding investments, while the remaining 10 billion yen is earmarked for increasing strategic/cross shareholding investments to acquire profitable projects and for future investments in new businesses to foster growth. Brandes believes that reserving 10 billion yen for 'future investments' is not in the best interest of shareholders, and notes that the Company has held well in excess of this amount in cash for a number of years.

The Resolution, if approved, will only result in an incremental return to shareholders of approximately 2 billion yen, which, considering the historical average annual free cash flow generation (defined as net income + depreciation -- capex) of about 1 billion yen and the 10 billion yen earmarked for future potential investments, will not compromise what Brandes believes is 'necessary and ample reserves.'

Additionally, the current management plan is targeting a long-term ROE of a mere 4%, while the Company itself believes its cost of capital is only 5%. Even assuming 5% is the correct assumption for the Company's cost of capital (which Brandes believes is in fact higher), this implies that the Company will continue to destroy value by deploying the excess capital in below cost of capital projects. While Brandes supports necessary investments to improve the long-term value of the Company, it is essential that any such investment is only made if it is reasonably expected to generate rates of return above its cost of capital.

Lastly, the Company states that due to the highly seasonal 4th quarter concentrated orders of the construction industry, it is not prudent to commit to annual share buybacks at the start of the fiscal year. Brandes does not dispute the seasonality of orders, but believes that the Resolution does not reduce management flexibility in executing share buybacks in any way, given its modest size relative to the Company's more than ample cash reserves.

While Brandes is disappointed that the Company does not support its Resolution, it commends the Company for putting the Resolution to a vote at the upcoming annual shareholders meeting. Brandes also acknowledges that the Company is taking small positive steps in the right direction by announcing a memorial dividend of 10 yen per share for FY3/2008, and a share buyback program of up to 1 million shares for a maximum of 1.0 billion yen during the period of June 30th, 2008 -- November 10th, 2008. Although the Company only managed to execute less than one-third of the share buyback program it announced in FY3 2008, Brandes expects that the company will fully execute the recently announced share buyback program for this fiscal year.

Regardless of the outcome of the vote on the Resolution, Brandes believes that all the Company's shareholders will have benefitted from this process. Brandes will continue to monitor the Company's capital structure and the investments that it makes, and will consider making or supporting similar proposals in future years designed to enhance the long-term value of the Company.

On behalf of its investment advisory clients, Brandes currently holds in excess of 9% of the Company's shares. This represents an ownership position built since 1998.

Brandes is a U.S. registere investment advisor. Located at 11988 El Camino Real, Suite 500, San Diego, California, 92130. Brandes managed approximately US$93.4 billion on behalf of institutional and individual investors, as of March 31st, 2008.

The above information is based on the following conditions. This press release is not intended to advocate the purchase or sale of the Company's stock. Also, the press release is not based on the intention that Brandes, its related parties and other third parties solicit proxies for the Company's Annual General Meeting ("AGM").

This press release is based on information currently available as of the date of this announcement. Brandes has acted in full caution and on best effort, but cannot guarantee that the information is correct. In addition, the Resolution does not guarantee a specific outcome for the votes at the AGM. Brandes may, depending on the situation, change or revoke the Resolution.

This press release is not intended to influence the share price of the Company. Brandes does not guarantee any reaction by the market in regards to this press release, the Resolution or the Company's response to the Resolution and press release. This press release is solely intended to explain the background and rationale for submitting the Resolution.

SOURCE:
Brandes Investment Partners, L.P.
CONTACT:
Ray Lewis of Brandes Investment Partners, L.P.
+1-858-523-3588
PublicRelations@brandes.com
Web site: http://www.brandes.com

Technology: CDMA Development Group supports China's telecommunications restructuring plan

Reorganized telecom sector will encourage differentiation between the differing wireless technologies and increase competition

ADVISORY (PRIME NEWSWIRE) --

WHAT:
The CDMA Development Group (CDG) expressed its support for the recently announced restructuring of China's telecommunications industry, further adding that it believes the new structure will catalyze the fair distribution of 3G licenses and further increase the growth of CDMA in China. The company issued the following statement:

"The CDMA community supports the restructuring of China's telecommunications industry and believes it will lead to the licensing of 3G services, further stimulate healthy competition and build economies of scale for CDMA in China, as well as around the world through increased exports. The performance and flexibility of CDMA2000(r) networks have enabled operators to
rapidly and cost-effectively deploy telephony services and new capabilities such as high-speed wireless broadband Internet access, highly accurate location-based services and essential public safety services. The CDG plans to be an active participant in meeting the demand for these services in China through the continued expansion of the country's CDMA2000 network," stated Perry LaForge, executive director of the CDG.

Executives from the CDG are available to provide commentary regarding its support of China's telecommunications industry restructuring, including the positive effect the CDG believes this restructuring will have on innovation, competition and the growth of CDMA in China and around the world.

WHO:
The CDMA Development Group is a trade association formed to foster the worldwide development, implementation and use of CDMA2000 technologies. The more than 130 member companies of the CDG include many of the world's largest wireless carriers and equipment manufacturers. The primary activities of the CDG include development of CDMA2000 features and services, public relations, education and seminars, regulatory affairs and international support.

Currently, there are more than 500 individuals working within various CDG subcommittees on CDMA2000-related matters.

PRESS INQUIRIES:
Please contact the CDG News Bureau at
+1-714-540-1030 or cdg@bockpr.com.
The CDG logo is available at http://www.primenewswire.com/newsroom/prs/?pkgid=2911

-0-
CONTACT:
CDG News Bureau
Ricca Silverio
+1 714 540-1030
cdg@bockpr.com

High-Tech: WiQuest to showcase industry firsts at Computex

Company Offers a View of new wireless USB applications shipping in 2008

Computex Taipei 2008 Allen, Texas (BUSINESS WIRE) - WiQuest Communications, Inc., the worldwide leader in complete ultrawideband solutions, announced today that it will be demonstrating new ultrawideband (UWB) consumer applications that are based on WiQuest technology at Computex Taipei, June 3-7, at the Grand Hyatt Hotel in Taipei.

WiQuest will provide hands-on demonstrations of new Wireless USB applications implemented in consumer products by various Tier 1 manufacturers that will be available to consumers in the second half of 2008. These new products are based on WiQuest's leading Wireless USB technology and span applications in leading notebook PCs and, for the first time, in multifunctional devices beyond basic hubs and dongles. These applications are based on the USB-IF's Wireless USB 1.0 Specification.

Steve Perna, WiQuest's CEO and president, and Todd Brown, VP of sales, will also be on hand to answer questions on the company's products and strategies.

WiQuest's complete solution has been selected by most Tier 1 PC and PC Peripheral companies in the industry. The company is also leading the way for UWB with Wireless Digital Video (WiDV?) and Wireless USB in the enterprise and consumer arenas.

To schedule a private demonstration, please contact Eddie Liao at +(886)-0916-243-845 or email Taiwan@WiQuest.com.

WiQuest's Taiwan sales and support office is located at WiQuest Communications, Inc.Taiwan BranchFuxing S. Rd., Sec. 2#237, 10F-3Taipei, 106 Taiwan R.O.C.Tel: +(886)-02-2709-7816 About WiQuest WiQuest Communications, Inc. is the leading consumer solutions company designing and developing complete WiMedia-based ultra high speed, ultrawideband (UWB) platforms.
WiQuest's complete solution portfolio includes chipset, software and manufacturing designs. WiQuest's world class technology and technical support enable a new class of "off-the-shelf-production" wireless connectivity to PC, digital entertainment, consumer electronics and mobile systems enabling The New Frontier of Wireless?.

Founded in September 2003, WiQuest's strong team comprises thousands of years of collective industry semiconductor, software, and systems experience, resulting in dozens of successful high-volume product implementations including Wireless LAN, DSL and Ethernet solutions. To learn more about WiQuest, please visit www.WiQuest.com.

WiQuest?, WiDV?, Wireless Docking?, and The New Frontier of Wireless? are trademarks of WiQuest Communications, Inc. All other trademarks and copyrights are the property of the respective owners.

WiQuest Communications Pam Johnson, 214-547-1600 Pam.Johnson@WiQuest.com

Technology: SISVEL and CESI work together for the success of Chinese standards

Turin,Italy (BUSINESS WIRE) - SISVEL today announced that it entered into an agreement with CESI to promote the cooperation between Chinese and foreign companies on Intellectual Property Rights and to support the success of Chinese standards.

As a result of this agreement, SISVEL will also work with CESI to support and facilitate the formation of patent pools related to Chinese standards. This will allow a one stop access to license essential patents to practice those new Chinese standards and will contribute to the success of those standards.

"Cooperating with CESI to facilitate the formation of patent pools related to Chinese standards is an honour for Sisvel.", declared Mr Gian Antonio Pancot, Chief Executive Officer of SISVEL SpA. "It is also in line with our company's strong commitment to the worldwide standardization process of consumer electronic technologies."

About CESI

CESI (the China Electronics Standardization Institute) is a Chinese non-profit institution engaged in standardization and conformity assessment activities in the field of electronic information technologies. Authorized by specific government departments, CESI organizes the development of national and industrial standards for electronic information technologies based on the principle of consensus and transparency. It is devoted to the interests of the public, promoting scientific and technical development and participating in international standardization activities in the field of electronic information technologies in order to safeguard legitimate national interests.

About SISVEL

SISVEL is a patent management company that has become a leader in promoting innovation and in licensing patents for the past 25 years. It is a recognized world leader in increasing the value of patents, enabling users to acquire patent rights necessary for a particular technology standard from multiple patent holders in a single transaction, and providing one-stop
technology platform patent licenses.

For more information, please refer to www.sisvel.com.
Alberto Leproni
PR & Media Relations
Sisvel S.p.A
Tel: +39011 9904114
Fax: +39011 9863725
E-Mail: alberto.leproni@sisvel.com

Energy: SkyPower exploring strategic alternatives

Developer plans to xatapult its growth & penetration of the wind and solar industry

Toronto - CNW-AsiaNet - Canada's leading renewable energy developer, SkyPower Corp, a Lehman Brothers Company, announced today that it is considering strategic alternatives to augment its growing capital base and accelerate development of its wind and solar pipelines. The Company's portfolio of wind and solar projects - in various stages of development and construction - represents in excess of 10,000 MW of potential renewable energy.

As the wind industry continues to evolve and consolidate, SkyPower intends to strengthen its position as the supplier of choice for large renewable energy projects. The Company has substantial capital investments in wind turbines and solar panels, and plans to continue its investment program in order to meet the growing demand of utilities in North America and
selected countries across the globe.

"We are very proud of SkyPower's growth and penetration in the Canadian renewable landscape. The clean energy sector is growing exponentially in Canada and around the world. We believe that Canada is a key region where we will continue to have a lead market share, and we look forward to the coming months as we explore alternatives with our partners to take the Company to the next stage of its growth trajectory," said Kerry Adler, President & Chief Executive Officer of SkyPower.

About SkyPower

SkyPower Corp., a Lehman Brothers Company, is Canada's largest renewable energy developer with interests in more than 100 wind and solar projects at various stages of construction and development across 12 provinces/states, representing more than 10,000 MW of potential capacity. Working with local partners, SkyPower also has wind energy under development in India and hydro projects under development in Panama. For more information, visit www.skypower.com

SOURCE: SkyPower Corp.
CONTACT: David Bacon, (416) 979-4622

Business: Crossbeam expands presence in Japan

Boxborough, Mass. and Tokyo, (ANTARA News/PRNewswire-AsiaNet) - Crossbeam Systems announced today that it has expanded its presence in Tokyo, Japan to serve the growing market demand for its Next Generation Security Platforms. To head up operations, Crossbeam has appointed industry veteran Mike Mizumoto to lead the company's efforts.

Crossbeam provides a Next Generation Security Platform that virtualizes delivery of best-of-breed security applications from leading vendors. Customers comprise more than 700 large enterprises and service providers worldwide. Global customers include leaders such as ABN Amro, Bank Leumi, Capital One, CheckFree (now part of Fiserv), Emirates Bank, Fujitsu, Scottrade and Telefonica Empresas, to name a few. The expansion into Japan will build upon Crossbeam's global success in helping the world's largest enterprises successfully protect and manage their security infrastructure with the carrier-class speed, scalability and reliability required by high-performance networks.

"The market opportunity for Crossbeam in Japan is significant, and we now have on-the-ground expertise and leadership in Mizumoto, support from our security and integration partners, and a rowing pipeline of customers to drive revenue and market share growth," said Pete Fiore, president and CEO of Crossbeam Systems. "Mizumoto brings the right skill set to address country-specific customer requirements -- where the massive consolidation and simplification benefits of our security platform resonate highly with companies looking to incorporate more cost- and energy-efficient network security solutions."

In his new role as country manager, Mr. Mizumoto will be responsible for running Crossbeam's sales and marketing efforts and managing operations. A primary focus will be on collaborating closely with Crossbeam's ISV partners, including Check Point, IBM, Trend Micro and Websense, as well as leading integration partners in Japan to develop opportunities for deploying next-generation security services -- also referred to as the high-end Unified Threat Management (UTM) market.

According to a recent IDC study, the market demand in Japan for threat management security appliances grew by 17 percent to 29.7 billion Yen over the same period last year. "Security appliances have already overtaken software in the threats management products market because of its advantage in cost-performance and ease of installation," said Hideki Hanaoka, research manager, Security, IDC Japan.

"Crossbeam is well positioned to take advantage of the managed security services market in Japan, which IDC estimates will reach 480 billion Yen, approximately US $4.8 billion by 2010," said Mr. Mizumoto. "IDC has consistently ranked Crossbeam as the high-end UTM leader for the last three years -- one of the key deployment platforms for managed security services. This is important to customers, who are looking to reduce the cost and complexity of security management with a scalable best-in-class security infrastructure that only Crossbeam can provide. I look forward to building Crossbeam's presence in Japan that, along with our ISV and distribution partners, will meet the growing demand for next-generation security services."

A graduate of Keio University with a degree in economics, Mr. Mizumoto brings to Crossbeam more than 25 years' experience working in sales, marketing and executive management positions at leading IT and networking companies. His most recent tenure was spent at Forval Creative and Zuken NetWave, Inc., two of the country's top distributors of IT security products and services. Mr. Mizumoto brings a deep understanding of the requirements for success in securing Japan's largest networks, where he helped to define the UTM market and drive its rapid growth.

Crossbeam and Security Industry Leaders Address the Media

In a press conference to be held today at 10:00 am at the Aoyama Diamond Hall in Tokyo, Japan, the top leaders in security will gather to discuss opportunities in the Japanese market and how they can work together to address customers' next-generation security needs. Senior security executives will include:
-- Mr. Mike Mizumoto, country manager, Crossbeam Systems
-- Mr. Takahiro Sugiyama, president, Check Point Japan
-- Ms. Tomomi Arakawa, director, Internet Security Systems,ITS, IBM Japan
-- Mr. Akihiko Omikawa, executive vice president and general manager,

Trend Micro Japan, Global Consumer Business Unit, Global Service Business Unit
-- Mr. Seiji Goto, country manager, Websense Japan

In addition to presentations from each of the senior executives, the press conference will provide details on Crossbeam's expansion, including plans for hiring and go-to-market efforts with its partners to deliver integrated, highly-competitive next-generation security solutions.

"We work closely with Crossbeam on a global scale, and look forward to the opportunities we can develop locally," said Mr. Omikawa, executive vice president and general manager, Trend Micro Japan. "Crossbeam and Trend Micro's recently launched Next Generation Content Gateway solution family has been well-received and we expect to accelerate these deployments in Japan. Customers can expect the solution to deliver superior performance, ease-of-management, and scalability for their Web and content security services."

Following the press conference, the public is invited to participate in a seminar on Next Generation Security to be lead by Crossbeam and will include guest speakers from NetOne Systems, a leading network integrator for security products and services.

About Crossbeam

Crossbeam Systems, Inc. transforms the way enterprises, service providers and government agencies architect and deliver security services. The basis of Crossbeam's solution is its Next Generation Security Platform, a highly scalable hardware platform that facilitates the consolidation, virtualization and simplification of security services delivery, while preserving the customers' choice of best-of-breed security applications. Crossbeam offers the only security platform that delivers unparalleled network performance, scalability, adaptability and resiliency. Customers choose Crossbeam to intelligently manage risk, accelerate and maintain compliance, and protect their businesses from evolving threats. Crossbeam is headquartered in Boxborough, Mass., and has offices in Europe and Asia Pacific.

More information is available at: www.crossbeam.com

Crossbeam Systems and Crossbeam are registered trademarks of Crossbeam Systems, Inc. All other company, product or service names not owned by Crossbeam mentioned in this press release are the property of their respective owners.

Contact: Sharon Dratch
Davies Murphy Group
(781) 418-2425
crossbeam@daviesmurphy.com
http://www.daviesmurphy.com

SOURCE: Crossbeam Systems, Inc.
CONTACT: Sharon Dratch of Davies Murphy Group for Crossbeam Systems, Inc.,
+1-781-418-2425,
crossbeam@daviesmurphy.com; or
Matt Rollender of Crossbeam Systems,
+1-978-318-7500,
mrollender@crossbeam.com
Web site: http://www.crossbeam.com

Technology: Applied Robotics announces addition of a new distributor in China

Glenville, N.Y. (BUSINESS WIRE) - Applied Robotics Inc., a leading provider of automation end-of-arm tooling and connectivity solutions has recently added a new Distributor to their already prestigious line-up of partners.
China Shipbuilding Equipment & Materials Northeast Corporation (CSEMNC), a subsidiary of China Shipbuilding Industry Corporation (CSIC) joins the eleven existing Applied Robotics, Inc. Distributors and will bring new coverage to all of
China.

"Wider distribution of our products and solutions internationally will continue to be an ongoing focus for Applied Robotics, Inc. and we are pleased to have added CSIC as a distributor in China," says Jim Fitzgerald, vice president of Applied Robotics Inc. "The Chinese industrial market is one of the fastest growing world markets and we're excited to be working with CSIC.""Our agreement with Applied Robotics, Inc. not only opens up a new revenue stream for our company, it also helps solidify and broaden our relationships with automotive and other industries by providing additional products and solutions they require," says Mr Yingkai Chen, director of the mechanical and electronic department at CSIC.

Since 1963, CSEMNC has been an important player in the Chinese industrial arena. Their newly developed automation division works extensively with the Chinese automotive industry as well as the automotive transplants in China and other industries. They look to develop new products as well as offering training and support to that and other industries throughout the whole of China. The Applied Robotics, Inc. product line of tool changers, collision sensors, grippers, connectivity technology and custom solutions will well complement the CSIC existing line of products and total automation support goals.

About Applied Robotics

Applied Robotics Inc., headquartered in Glenville, N.Y. is an ISO-9001 certified, employee-owned company serving the world's automation market. Founded in 1983, Applied Robotics designs and manufactures end-of-arm tooling and connectivity solutions intended to solve complex automation problems and improve efficiencies. Serving a wide spectrum of customers and industries ranging from large Fortune 500 companies to small privately-held businesses, the company's wrist-down solutions can be found in manufacturing, welding, assembly, material removal and material handling applications throughout the United States, Canada, Pacific Rim, Europe, Mexico, South America, Australia, Malaysia, Indonesia, the Philippines, Singapore, Thailand and China.. More information can be found on the company website at www.arobotics.com.

Applied Robotics and the Applied Robotics logo are trademarks of Applied Robotics Inc. All other trademarks are owned by their respective companies.

Applied Robotics Inc.Joanne Brown, Marketing Coordinator, 518-384-1000 Fax: 518-384-1200 jbrown@arobotics.com